BLTX150

150 Mhz 5 Watt Transmitter

Configuration software available here.

Please contact us for more information regarding status, pricing, and availability.

Operating on the 2 Meter amateur radio band, this frequency agile transmitter can be customized to run on other frequencies in the adjacent to the 2 meter band. Powered by a 2-cell LiPo battery, the maximum output power is 5 watts. The gain on the amplifier is programmable, as low as .5 watts. By lowering the input power supply to 5 Volts, the output power range can be set to any value between 10 mW and 1 Watt.

An input pin is available to disable the transmitter when the pin is pulled high.

The programming interface is different than the other transmitters, so make sure you are using the software linked above.

A BRB USB interface is required to program the device. You must supply a power source that does not exceed 9.0 volts.

Ordering information available here.